Controllo remoto Ebox WEB-SNMP : Elenos Broadcast Experience (ITA)

Ebox è un unità di controllo remoto, che dispone di interfaccia web e agente SNMP.

Il convertitore Ethernet è configurato per essere usato con tutti i trasmettitori, eccitatori, amplificatori, sistemi e unità di scambio di Elenos. La compatibilità
Elenos Ethernet Converter module is configured to be associated with transmitters, exciters, amplifiers, systems, exchange unit and telemetry unit. There is a compatibility with main variables (eg, forward power, reflected power, ON/ OFF, fault, etc.), that allows at the modem to be interchanged between the various types of equipment.
It’s available a "base" version, with minimum functionality guaranteed. Then it’s possible to add a variety of packages that provide more advanced functions and/or more robust and sophisticated functions. Update packages are available for customer.

WEB and SNMP

Control your transmitter through web browser intuitive user interface. It also allows SNMP Browsers to issue SNMP requests to retrieve agent's data, or make changes to the agent. A built-in trap receiver can receive SNMP traps and handle trap storm.

Connect to Elenos World

EBOX is compatible with all Elenos Transmitters.

	The new generation transmitter by ELENOS is characteristic to have a very high efficiency, that represent a big advantage for the ecology and for the cost of exercise.
	The name of the "philosophy" in ELENOS RF design. Very high efficiency in all the output power range, very low temperatures, very long life for the products.
	System (hardware and software) that allows a safe functioning of the transmitter in extremely heavy environmental conditions, over the standards.
	A new image, technological breakthrough, energy saving.
	Elenos S.r.l certifes our lead free products delivered to our customers conform to the RoHS requirements

DIMENSIONS
Dimensions : W-H-D	105.5x47x22.5mm
Weight	95gr
Position	inside the transmitter outside the transmitter (there are not specific limitations for assembly : the module must be attached to a surface close to the transmitter using 4 screws)

CONNECTORS
Ethernet connector	RJ45 with logic speed 10-100Mbit/sec
EIA485 connector	DB9 male
Mains connector	MicroFit 2P male

BUTTONS
Reset/Timeout	to reset the unit
Wd Act.	to stop the watchdog activity
485 En.	to disable the transmission

LEDS
485 Tx (yellow)	transmission active
485 Rx (yellow)	reception active
Reset/Timeout (red)	reset or watchdog active
Wd Act. (green)	watchdog enabled
485 En. (green)	transmission enabled
Activity (yellow)	standard operation

TIMES
Restoring manual commands	60min
Watchdog	30sec
Reset	2.5sec
Debounce buttons	0.5sec
Signal activity filter	0.25sec

FUNCTIONS AND PROTOCOLS
Hostlink	yes
Web server	yes
SNMP agent	yes
SMTP protocol	yes (from September 2012)

MONITORED DEVICES
Indium series (code M004)	124 slave OID, 26 traps
ETG2000/ETG3500 (code M005)	126 slave OID, 26 traps
E5000 (code M006)	128 slave OID, 20 traps
E2000/E3000 (code M007)	121 slave OID, 20 traps
ET7000 (2x3.5KW) (code M008)	311 slave OID, 81 traps
ET10000 (2x5KW) (code M009)	311 slave OID, 81 traps
ET15000 (3x5KW) (code M010)	357 slave OID, 94 traps
Echos6 (code M011)	180 slave OID, 42 traps
ET10000 (3x3.5KW) (code M012)	from May 2012
ET15000 (5x3.5KW) (code M013)	from May 2012
Indium series and ETG5000 (code M104)	from May 2012

INSTALLATION REQUIREMENTS
Powe supply	External source with voltage 9-28Vdc. Conform to a limited power source in accordance with EN60950-1 (limited to 28Vdc and 1A)
Power consumption	2.5W max (280-90 mA@12V)

All pictures are Elenos property and are only indicative. The general specifications can be changed without any notice.
Tutte le immagini sono di proprietà Elenos e sono solo indicative. Le specifiche generali possono essere soggette a modifiche senza preavviso.