Ebox is a remote control unit equipped with webserver and SNMP protocol.
Elenos Ethernet Converter module is configured for use with transmitters, exciters, amplifiers, systems, exchange unit and telemetry units. There is a compatibility with main variables (eg, forward power, reflected power, ON/ OFF, fault, etc.), allowing the modem to be interchanged between the various types of equipment. It’s available in a "base" version, with minimum functionality guaranteed. Then it’s possible to add a variety of packages providing more advanced functions and/or more robust and sophisticated functions. Update packages are available.
Control your transmitter through web browser intuitive user interface. It also allows SNMP Browsers to issue SNMP requests to retrieve agent's data, or make changes to the agent. A built-in trap receiver can receive SNMP traps and handle trap storm.
EBOX is compatible with all Elenos Transmitters.
 |
The new generation transmitter by ELENOS is characteristic to have a very high efficiency, that represent a big advantage for the ecology and for the cost of exercise. |
 |
The name of the "philosophy" in ELENOS RF design. Very high efficiency in all the output power range, very low temperatures, very long life for the products. |
 |
System (hardware and software) that allows a safe functioning of the transmitter in extremely heavy environmental conditions, over the standards. |
 |
A new image, technological breakthrough, energy saving. |
 |
Elenos S.r.l certifes our lead free products delivered to our customers conform to the RoHS requirements |
 |
 |
 |
 |
|
DIMENSIONS |
|
|
Dimensions : W-H-D |
105.5x47x22.5mm |
|
Weight |
95gr |
|
Position |
inside the transmitter outside the transmitter (there are not specific limitations for assembly : the module must be attached to a surface close to the transmitter using 4 screws) |
|
|
|
|
CONNECTORS |
|
|
Ethernet connector |
RJ45 with logic speed 10-100Mbit/sec |
|
EIA485 connector |
DB9 male |
|
Mains connector |
MicroFit 2P male |
|
|
|
|
BUTTONS |
|
|
Reset/Timeout |
to reset the unit |
|
Wd Act. |
to stop the watchdog activity |
|
485 En. |
to disable the transmission |
|
|
|
|
LEDS |
|
|
485 Tx (yellow) |
transmission active |
|
485 Rx (yellow) |
reception active |
|
Reset/Timeout (red) |
reset or watchdog active |
|
Wd Act. (green) |
watchdog enabled |
|
485 En. (green) |
transmission enabled |
|
Activity (yellow) |
standard operation |
|
|
|
|
TIMES |
|
|
Restoring manual commands |
60min |
|
Watchdog |
30sec |
|
Reset |
2.5sec |
|
Debounce buttons |
0.5sec |
|
Signal activity filter |
0.25sec |
|
|
|
|
FUNCTIONS AND PROTOCOLS |
|
|
Hostlink |
yes |
|
Web server |
yes |
|
SNMP agent |
yes |
|
SMTP protocol |
yes (from September 2012) |
|
|
|
|
MONITORED DEVICES |
|
|
Indium series (code M004) |
124 slave OID, 26 traps |
|
ETG2000/ETG3500 (code M005) |
126 slave OID, 26 traps |
|
E5000 (code M006) |
128 slave OID, 20 traps |
|
E2000/E3000 (code M007) |
121 slave OID, 20 traps |
|
ET7000 (2x3.5KW) (code M008) |
311 slave OID, 81 traps |
|
ET10000 (2x5KW) (code M009) |
311 slave OID, 81 traps |
|
ET15000 (3x5KW) (code M010) |
357 slave OID, 94 traps |
|
Echos6 (code M011) |
180 slave OID, 42 traps |
|
ET10000 (3x3.5KW) (code M012) |
from May 2012 |
|
ET15000 (5x3.5KW) (code M013) |
from May 2012 |
|
Indium series and ETG5000 (code M104) |
from May 2012 |
|
|
|
|
INSTALLATION REQUIREMENTS |
|
|
Powe supply |
External source with voltage 9-28Vdc. Conform to a limited power source in accordance with EN60950-1 (limited to 28Vdc and 1A) |
|
Power consumption |
2.5W max (280-90 mA@12V) |
| Elenos 2013 © | VAT 00415540384 |
|
Contacts | Privacy | Site Map |
All pictures are Elenos property and are only indicative. The general specifications can be changed without any notice.
Tutte le immagini sono di proprietà Elenos e sono solo indicative. Le specifiche generali possono essere soggette a modifiche senza preavviso.
